Naz Power started out as a Children’s Illustrator until she slowly found her way into designing her own figurines.
Her latest collection has little messages embedded in them, inspired by the things she says to her son when he needs a bit of encouragement.
That's where "You Can Do Anything"
came from.
Naz wanted to turn those words into something tangible that he can keep and come back to whenever he needs a reminder.
And now, you can have a little reminder of your own🖤YCDA Collection
NOW LIVE
YCDA B&W
A$390.00
B&W RESIN FIGURINE SET 🖤🤍
ONLY ONE. NO-RERUNS.
The little imperfections on this piece are intentionally left visible as part of its story. A reminder that being a little beaten up doesn't make you any less worthy of being here.
This 4" figurine comes with three magnetised translucent accessories:
🛹 Skateboard
🐼 Panda Companion
🌸 Flower
Each piece was designed, resin-printed and finished by me in my home studio while learning and figuring things out along the way. They're not factory-made or mass-produced, so expect a few wobbles, imperfections and little quirks🖤
It comes with it's own box and an original sketch.
A LITTLE DELICATE, A LOT CUTE
This piece is 3D printed in resin made as a collectible display piece, so please handle it gently and give it a safe little spot on your shelf.
Please keep away from young children and pets. Some parts are small and may present a choking hazard, and rough handling may cause pieces to break or chip.
If one of the little pieces has an unfortunate accident and chips or comes off, don't panic! You can usually reattach it with a strong super glue. I recommend Gorilla Super Glue. Allow the glue to fully cure before handling the piece again.
⚠️ MAGNET FRIENDLY ≠ MAGNET SAFE
This figurine contains small magnets.
Please keep the magnetic components away from young children and pets. Swallowed magnets can cause serious and potentially life-threatening internal injuries.
If a magnet is swallowed, or you think one may have been swallowed, seek emergency medical attention immediately.SHIPPING & RETURNS POLICY.
YCDA minimal
A$350.00
MINIMAL RESIN FIGURINE 🤍
ONE ONLY. NO RE-RUNS.
This is the minimal version — stripped back to a simple white finish, with a few dirt marks and scuffs left behind and reminders hidden in plain sight.
The little imperfections on this piece are intentionally left visible as part of its story. A reminder that being a little beaten up doesn't make you any less worthy of being here.
This 4" figurine comes with three magnetised "smokey black" translucent accessories:
🛹 Skateboard
🐼 Panda Companion
🌸 Flower
Each piece was designed, resin-printed and finished by me in my home studio while learning and figuring things out along the way. They're not factory-made or mass-produced, so expect a few wobbles, imperfections and little quirks🖤
It comes with it's own box and an original sketch.
A LITTLE DELICATE, A LOT CUTE
This piece is 3D printed in resin made as a collectible display piece, so please handle it gently and give it a safe little spot on your shelf.
Please keep away from young children and pets. Some parts are small and may present a choking hazard, and rough handling may cause pieces to break or chip.
If one of the little pieces has an unfortunate accident and chips or comes off, don't panic! You can usually reattach it with a strong super glue. I recommend Gorilla Super Glue. Allow the glue to fully cure before handling the piece again.
⚠️ MAGNET FRIENDLY ≠ MAGNET SAFE
This figurine contains small magnets.
Please keep the magnetic components away from young children and pets. Swallowed magnets can cause serious and potentially life-threatening internal injuries.
If a magnet is swallowed, or you think one may have been swallowed, seek emergency medical attention immediately.SHIPPING & RETURNS POLICY.
YCDA charms
A$50.00
YOU CAN DO ANYTHING translucent charms
A LITTLE DELICATE, A LOT CUTE
Each piece is 3D printed in resin and designed to be bag charms but they are also a little delicate, so please handle with care.
Please keep away from young children and pets. Some parts are small and may present a choking hazard, and rough handling may cause pieces to break or chip.
If one of the little pieces has an unfortunate accident and chips or comes off, don't panic! You can usually reattach it with a strong super glue. I recommend Gorilla Super Glue. Allow the glue to fully cure before handling the piece again.
SHIPPING DOMESTIC & INTERNATIONAL ORDERS
YCDA splatter
A$250.00
ONE ONLY. NO RE-RUNS.
A 5" figurine comes with a surprise sketch, a few tiny reminders hidden in plain sight & two magnetised accessories:
🛹 Skateboard
🐼 Panda Companion
Each piece was designed, resin-printed and finished by me in my home studio while learning and figuring things out along the way. They're not factory-made or mass-produced, so expect a few wobbles, imperfections and little quirks🖤
A LITTLE DELICATE, A LOT CUTE
This piece is 3D printed in resin made as a collectible display piece, so please handle it gently and give it a safe little spot on your shelf.
Please keep away from young children and pets. Some parts are small and may present a choking hazard, and rough handling may cause pieces to break or chip.
If one of the little pieces has an unfortunate accident and chips or comes off, don't panic! You can usually reattach it with a strong super glue. I recommend Gorilla Super Glue. Allow the glue to fully cure before handling the piece again.
⚠️ MAGNET FRIENDLY ≠ MAGNET SAFE
This figurine contains small magnets.
Please keep the magnetic components away from young children and pets. Swallowed magnets can cause serious and potentially life-threatening internal injuries.
If a magnet is swallowed, or you think one may have been swallowed, seek emergency medical attention immediately.
SHIPPING & RETURNS POLICY.
Naz Power
Artist • Illustrator • Toy Designer
Cute. Badass. A little weird.
Characters, collectibles, illustration & creative projects by Naz.
GROWL.
GROWL.
Collectibles
Nightfall
A$80.00
🌙 First of my Nightfall series. She’s quiet, with twin-tails that fall like night itself, and a cheetah that never leaves her side.
She’s lightweight and ready to hang, with stars and a tiny planet in her hair that softly glow in the dark—like constellations.
Product Details:
Dimensions: 30 cm (H) x 25 cm (L) x 1.5 (W)
Material: Sustainably sourced wood, hand-painted with high-quality acrylic paint
Weight: Approximately 335 g (unpackaged)
RIN-001 Collector’s Duplicate – Growl Series
A$230.00
Rin makes her return in this one-of-a-kind duplicate from the Growl series. This resin figurine comes with all three of Rin’s signature (magnetised) accessories:Checkered skateboardCheetah companionFlower + a set of 3 RIN holographic stickers
Unlike the Collector’s Edition (valued at $250), this duplicate does not include hand-painted embellishments or premium packaging. Instead, it’s offered as a simpler, more affordable way to own Rin’s story in physical form.
Rin is a quiet, resilient figure who listens to what the world overlooks and now, her journey can live on your shelf.⚡ Only one duplicate available. Once sold, it won’t be reproduced.
Shipping & International Orders
International orders may be subject to additional processing, customs duties, taxes, or import fees depending on the destination country.
These charges are not included in the item price or shipping cost and are the responsibility of the customer.
NAZ POWER is not responsible for any delays, fees, or charges imposed by customs authorities, postal services, or courier companies once the parcel has left Australia.
“ Creating Under Pressure, Motherhood & The Art Of Authenticity”
A collaboration w/ Life Without Andy & Vans Australia
LWA x VANS x NAZ POWER x
LWA x VANS x NAZ POWER x
Collaborations
& Projects
ARTWORKS
ARTWORKS
Work with
Naz Power.
-
Character-focused artwork and visual storytelling.
-
Creating original characters with personality and style based on their story.
-
Designing characters from 2D sketches into 3D models.
(limited availability)
